(NEW) Designed capsule machine !!!

Operation video link:

http://www.youtube.com/watch?v=phM8K52lL8E&feature=g-upl&context=G2148f01AUAAAAAAAAAA

1,Cap sheet

2,Encapsulation sheet

3,Positioning sheet

4,Separating sheet

5,Powder keeping tool

6,Bottom sheet

7,Tamping tool

Procedure Demo:

1, Pour a number of empty capsules into the  encapsulation sheet.

2, Using a circular motion, gently shake the empty capsules into the holes, ready for the first filling.

3, Fix the encapsulation sheet onto the positioning sheet using the 1st row as a guide.

4, Push the central screw on the left side to make the 1^st batch of empty capsules fall down into the separating sheet.

5, Repeat process (1) then fix the encapsulation sheet onto the 2nd row of the positioning sheet.

6, Repeat process (2) to make the 2nd batch of empty capsules fall down into the separating sheet.

7, After filling the empty capsules, put the cap sheet on the capsules to make sure all the capsules are fixed firmly.

8, With one hand, pull the handle of the separating sheet.

9, With one finger of the other hand, raise the handle on the positioning sheet slightly to start separating the empty capsules .

10, Repeat until all the empty capsules are separated .

11, Pour a scoop of powder filler onto the bottom sheet and use the spreader to fill the capsule bottoms.

13, If the capsule bottoms are not full enough first time, use the tamping tool to compress the fillings and repeat the previous procedure.

14, Take the filled positioning sheet together with the cap sheet and put them into place on the bottom sheet.

15, Now, stand up.

16, Place both hands on the top. Press downwards with equal pressure .